CUSTOM MULTI-SIZE OFFSHORE CARGO & PIPE BASKETS Engineered CCU Solutions from 10FT to 75FT+ for Tubulars, Downhole Tools & Heavy Subsea Hardware Built to DNV 2.7-1 / EN 12079 / ISO 10855 with Marine C5-M Coating & Full Hot-Dip Galvanizing Options
Tianjin Longteng Industrial Co., Ltd. specializes in the custom engineering and volume fabrication of heavy-duty Offshore Cargo & Pipe Baskets. Built strictly in accordance with DNV 2.7-1, EN 12079, and ISO 10855 international marine lifting standards, our offshore baskets range in length from compact 10-foot tool units up to continuous 75-foot ultra-long tubular carriers. Engineered to withstand high dynamic impact forces during vessel-to-rig crane transfers in harsh sea states, Longteng baskets ensure maximum structural integrity and corrosion protection.
Key Highlights:
- Modular Length Range: Available in standard and custom lengths (10ft, 15ft, 20ft, 30ft, 40ft, 50ft, 60ft, 75ft+) to accommodate all downhole tools, drill pipes, risers, and subsea jumpers.
- High Structural Rigidity: Reinforced triangulated side truss structure provides exceptional bending stiffness, completely eliminating sagging or lateral deflection during crane hoisting.
- Certified Lifting Rigging: Integrated heavy-duty forged pad eyes tested via Non-Destructive Testing (NDT), designed for standard 4-leg dynamic wire rope slings.
- Handling & Cargo Security: Built-in multi-way forklift pockets, heavy internal sidewall D-rings, and floor drainage ports for instant seawater discharge.
- Marine Corrosion Resistance: Finished with multi-coat marine C5-M polyurethane paint systems or complete Hot-Dip Galvanizing (HDG to ISO 1461).
- Manufacturer: Tianjin Longteng Industrial Co., Ltd. (Tianjin Port, China).
Core Engineering & Design Features
- Full Spectrum of Modular Lengths (10FT to 75FT+) Whether you require compact 10ft/15ft baskets for subsea valves and handling tools, medium 20ft/30ft baskets for general rig supplies, or 40ft/75ft long-span pipe baskets for drill strings and casing joints, Longteng provides custom dimensions engineered to your precise cargo payload.
- Triangulated Heavy-Duty Structural Side Truss Constructed from high-strength structural hollow sections and heavy-gauge steel plates, the sidewalls incorporate engineered diagonal truss bracing. This lattice geometry delivers a superior moment of inertia, ensuring the basket remains rigid under maximum gross weight (MGW) dynamic lifts.
- Certified Pad Eyes & 4-Leg Dynamic Sling Interface Heavy forged steel pad eyes are fully integrated into the primary structural frame and welded with 100% full-penetration welds. Each lifting point undergoes rigorous ultrasonic testing (UT) and magnetic particle inspection (MPI) to guarantee zero failure during dynamic offshore lifts.
- Internal Lashing D-Rings & Floor Drainage Channels Strategically positioned heavy-duty forged D-rings line the interior sidewalls, allowing riggers to quickly secure round tubulars and irregular cargo with ratchet straps or chains. Perforated floor drainage slots prevent seawater, mud, and rain pooling.
- Advanced Marine Coating & HDG Corrosion Protection To withstand severe marine environments (salt spray, UV degradation, abrasive deck contact), baskets receive an abrasive grit-blast to Sa 2.5, followed by a heavy zinc-rich epoxy primer and high-build polyurethane finish (C5-M High Durability) or total Hot-Dip Galvanization.
Standard Technical Specifications Matrix
- Available Nominal Lengths: 10ft (~3.0m), 15ft (~4.5m), 20ft (~6.0m), 30ft (~9.0m), 40ft (~12.2m), 50ft (~15.2m), 60ft (~18.3m), 75ft (~22.86m) (Custom Lengths on Request)
- External Width Range: 1,000 mm ~ 1,600 mm (Standard: 1,200 mm / 1,400 mm)
- External Height Range: 600 mm ~ 1,400 mm (Standard: 1,000 mm / 1,200 mm)
- Design & Fabrication Standards: DNV 2.7-1 / EN 12079 / ISO 10855 / IMO MSC/Circ. 860
- Primary Materials: High-Strength Structural Steel (SPA-H / Q355D / S355J2) Charpy V-Notch Impact Tested at -20°C / -40°C
- Surface Treatment Options: Option A: 3-Coat Marine Epoxy/Polyurethane Paint System (C5-M Marine Grade) Option B: Full Hot-Dip Galvanized (HDG) to ISO 1461
- Lifting Lugs: Integrated 4-Point Forged Pad Eyes (45° Rigging Angle)
- Ground Handling: 2-Way or 4-Way Heavy Forklift Pockets
- Internal Tie-Downs: Welded Forged D-Rings at 1.0m ~ 1.5m Intervals
- Quality Assurance & Inspection: Visual (VT), Magnetic Particle (MPI), Ultrasonic (UT), Proof Load Test & Certification
Typical Offshore Applications
- Offshore Drilling Operations: Transport, deck staging, and offshore crane transfers of drill collars, tubing, casing joints, and subs.
- Subsea Installation & Intervention: Safe carriage of subsea flowline jumpers, control umbilicals, hydraulic hoses, and ROV tooling packages.
- Rig Maintenance & Turnarounds: Secure transit of scaffolding pipes, structural steel beams, marine valves, and heavy maintenance rigging.
- Offshore Wind Farm Construction: Deck storage and marine transit of long high-voltage cable assemblies, transition piece bolts, and turbine tools.