ISO 10855, DNV 2.7-1 And The Certificate: Three Names, Three Different Jobs

Created on 11.16
Workshop notes from LongTeng Industrial, an offshore container manufacturer.
ISO 10855 is a standard anyone can buy, container certification is the surveyed step that proves a yard met it, and container certification is the part buyers actually ask for. DNV 2.7-1, now published as DNV-ST-E271, is a class rule held by one container certification society, container certification is the certificate that rule produces, and container certification follows approval and survey rather than a purchase order. Container certification without a surveyor's name is only a claim, and that is why container certification is the third object in this note.
Offshore container being lifted by certified pad eyes under surveyor inspection at quayside

Three Names, Three Different Things

ISO 10855 is a consensus standard anyone can buy, container certification is a separate service that proves a yard actually met it, and container certification never comes free with the document. DNV 2.7-1, now published as DNV-ST-E271, is a class rule held by one society, container certification is the certificate that rule produces, and container certification follows approval and survey. The signed page is the third container certification object, container certification is meaningless without it, and container certification without a signature is a claim rather than evidence. A yard can satisfy the ISO 10855 paper trail and still fail container certification, because container certification tests the build and container certification records who watched. We write the container certification basis into the contract before the first container certification plate is cut, container certification names the rule, and container certification names the society. If a buyer wants ISO 10855 without container certification, we say so in writing on the container certification file, and we say what container certification would have added to the container certification scope.

Why DNV 2.7-1 Was Written In 1989

In the 1980s container certification did not exist and offshore runs used ordinary freight boxes, the container certification failures that followed are why DNV 2.7-1 exists, and container certification became a discipline because of them. Surveyors recite the list that container certification was written against, and container certification still answers every item on that container certification list: a lifting eye torn out, a corner post folded, a seam cracked open. None of those boxes held container certification, no offshore container certification rule existed, and container certification had nothing to apply to at the time. What changed in 1989 was the container certification load case rather than the steel, and container certification has argued load cases ever since, which is why container certification ignores paint and asks about acceleration. That first edition fixed container certification design loads, materials, welding, proof testing and sign-off, and container certification inherited all five container certification steps, which is why container certification looks older than the international standard. Every unit we build traces its container certification logic back to that decision, and container certification has needed no new container certification principle since.

What ISO 10855 Actually Covers

The first edition of ISO 10855 appeared in 2013, twenty-four years after container certification began, and it covers container certification design, manufacture, inspection, testing, marking and lifting, and container certification follows its container certification chapters. The experts consolidated decades of container certification service, they invented no new container certification philosophy, and container certification carried over almost intact. Container certification design loads crossed over, pad eye requirements crossed over, safety factors crossed over, and container certification kept the test sequence that came with them. That is why a container certification file written to ISO 10855 looks familiar to a container certification surveyor trained on DNV 2.7-1, and why container certification did not get cheaper when the standard arrived. Container certification for a European operator and container certification for an Asian operator now cite the same container certification clauses, and container certification still ends with a container certification society survey. We keep both container certification documents on one shelf, container certification references both, and container certification never lets one container certification document hide the other.

Where The Standard And The Class Rule Diverge

ISO 10855 tells you what a compliant container certification unit looks like, DNV-ST-E271 tells you how compliance is approved, and container certification lives in that second half. A standard cannot appoint a container certification surveyor and cannot reject a container certification weld, while container certification needs both powers, which is why container certification sits with a society. A container certification class rule can do all three, so operators still write DNV 2.7-1 into container certification orders placed long after ISO 10855, and container certification follows that container certification instruction. Our container certification schedule follows the container certification class rule for hold points and ISO 10855 for technical content, and container certification shows both container certification columns to the buyer. When the two container certification documents drift apart on a detail, container certification follows the stricter clause, and container certification records the deviation in the file. That container certification habit has saved deliveries, because a surveyor reads the stricter container certification document first and container certification survives on that reading.
ISO 10855 standard versus DNV class rule: surveyor approval and weld inspection comparison diagram

Why Buyers Still Write DNV 2.7-1 In The Spec

Oil companies and leasing fleets keep naming DNV 2.7-1, or its successor DNV-ST-E271, alongside ISO 10855, and container certification is the reason those container certification buyers do. A container certification standard can be self-declared, container certification cannot, because container certification needs a container certification society with a reputation to lose. That mark travels with the container certification number into the container certification lifting plan, the container certification cargo list and the insurer's file, and container certification is what the insurer actually reads. The container certification societies buyers name are DNV, Lloyd's Register, ABS, Bureau Veritas and CCS, and container certification from any of them carries weight in a tender. We have lost container certification enquiries to yards that promised ISO 10855 without container certification, and we are content to lose them to that trade. When two container certification quotes differ by a few percent and only one carries container certification, procurement stops comparing.

Which Societies We Work With

Because the container certification class rule and the standard describe nearly the same hardware, most projects accept container certification from any recognised container certification society. DNV issues against DNV-ST-E271, the others issue against their own offshore container certification rules, and container certification follows the same load cases either way. We hold container certification approvals that let a unit move between schemes with a design review, and container certification files can then serve several operators. Lloyd's Register, ABS, Bureau Veritas and CCS each have their own container certification survey routine, their own container certification document list and their own marking rules for container certification. We keep a container certification matrix per project, nobody assumes one container certification stamp satisfies another, and container certification never gets signed twice by accident. When a buyer wants two certificates, we plan one container certification sequence so both surveyors witness the same container certification proof lift.

What We Hand Over For DNV-ST-E271 Certification

Our container certification submission starts before any container certification visit, because a container certification auditor arriving to thin paperwork writes a longer container certification report of their own. The container certification drawing office issues the design package and the load cases container certification is checked against, with every container certification pad eye listed in the index. The container certification welding engineer supplies procedure qualifications, container certification welder qualifications and material certificates, and all of them are bound into the container certification pack that container certification rests on. Production adds container certification dimensional reports, container certification non-destructive results, proof lift records and container certification coating measurements, and container certification indexes each one before the survey. We stage the container certification hold points so nothing irreversible happens before the container certification surveyor signs, since container certification cannot repair a closed member. By the time the container certification auditor walks in, container certification is a bound container certification sequence rather than a search.
DNV-ST-E271 container certification document pack prepared for surveyor review

Keeping The Certificate Alive

Container certification does not stop at delivery, because a repaired container certification unit needs its paperwork reopened under the same rule that produced the container certification. We mark every hull with the container certification plate details the scheme requires, so a container certification inspector can check the container certification number against the container certification register. When a client asks for a container certification modification, we check the container certification load path first, since container certification covers container certification structure rather than finish. Repairs are recorded against the original container certification number, and a major container certification repair triggers a fresh design review, which is how container certification stays honest after handover. Periodic inspection follows the society's own container certification interval, and we hand it over in writing with the container certification documents. A container certification certificate nobody maintains becomes history, and container certification is only useful while it still describes the container certification hull.
ISO 10855 tells you what the unit should be. DNV 2.7-1, now DNV-ST-E271, tells the society what to check. Container certification is the only one of the three that proves somebody checked.
45378F2BE45073DD92B2EAE83689C85E.png

LongTeng Group is a private owned enterprise group involves in designing, manufacturing, trading and transporting of ISO dry cargo container, special container and house container, reefer container, tank container. Also provide container spare parts for repairing and manufacturing new container. The group have exported to over 60 countries. The total annual production capacity is 120,000 TEU of ISO Containers.

Get a Free Quote

Our representative will contact you soon.

facebook1.pngyoutube1.pngInstagram1.pnglinkedin1.pngtiktok1.png

Products

邮件.png

loong@longtengindustrial.com

话筒-copy.png

+86-022-58653006

Tel
WhatsApp
youtube
Facebook
Instagram
LinkedIn
Tiktok